Table of Contents
Advertisement
Page- and Record-oriented DJDEs
DJDE
C=
text
CANCEL=
{(name1)
[,name2]
[,...]) | ALL}
CANCEL=
(name1
[,name2]
[,...])
CANCEL=
ALL
186
Definition(s)
text
Specifies the comment text.
The regular meaning of the DJDE-C is to intersperse the DJDE packets with
comments. In the LCDS-Module this meaning is enhanced for putting in naviga-
tion information into the output data stream. This navigation information might be
used in an imagestream environment.
DJDE comments are only converted to NOPs in the PTX structured field provid-
ed they begin with: C INF ...
C indicates the start of a comment.
Information is stored from this point on!
A blank is the separator
INF indicates our special handling
... any string
•
DJDE-C INF... is page-oriented in this case.
•
DJDE-C INF... is appended to any other 'page-oriented' that precedes or fol-
lows this one on the same page.
•
DJDE-C INF... implies an "END" if none is explicitly specified.
•
If there are multiple occurrences of DJDE-C INF... the last is used automat-
ically.
•
The characters of the DJDE-C INF... are translated in accordance with the
specified CODE.
•
Texts are currently evaluated to a length of 126 characters (including
...INF...). Continuations are not permitted. The information to be evaluated
and inserted into the NOP text control ends with:
, (comma) to indicate that the following DJDE-C text will be ignored; or
; (semicolon) to indicate either that the following DJDE-C text will be ignored
or that this is the end of the record.
Cancels the HOLD (automatic re-imaging) previously specified by the H option
of an IMAGE, GRAPHIC parameter, and is effective on the current page.
Specifies the graphics to be canceled.
Specifies that all graphics being held are to be canceled.
Dynamic Job Descriptor Entries (DJDEs)
A29247-X4-X-8-7672
Advertisement
Table of Contents
