Oce XDL Reference Manual page 167

Using Logical Processing
Parameter
WHEN=
BOTTOM
WHEN=
NOW
WHEN=
TOP
Points to note
Note the following when using the RPAGE command. These points apply to offline jobs
only:
• If a record intended to satisfy the criteria for RPAGE is suspended by RSUSPEND, that
record is not checked for the RPAGE criteria. Note that the RPAGE criteria takes effect
when printing is resumed.
• Record selection/deletion is performed prior to RPAGE processing. If a record satisfy-
ing the RPAGE test criteria was previously not selected for or deleted from printing, the
RPAGE does not function.
• Since DJDE processing occurs prior to RPAGE processing, DJDE records are not
checked for satisfying the RPAGE criteria.
A29247-X4-X-8-7672
Definition(s)
BOTTOM
The logical page following the current logical page is
repositioned.
NOW
The current record is repositioned. This record prints
at TOF. Any spacing or skipping defined to occur be-
fore printing the current record is ignored.
TOP
The current logical page is repositioned.
The default is TOP.
RPAGE Command
Offline Online DJDE
Y Y N
159