Table of Contents
Advertisement
Dynamic Job Descriptor Entries (DJDEs)
DJDE
ASSIGN=
((channo,
(lineno
[,lineno][,...])),
(channo,
(lineno
[,lineno][,...]))
BOF=
value
A29247-X4-X-8-7672
Definition(s)
inkref
Specifies which inks in the ILIST parameter of the IDR command override the
corresponding inks specified in the inklist of the image.
If one inkref in the list is omitted, commas must be used to maintain the relative
positioning of the remaining ink references.
If more inkrefs are specified than contained in the inklist of the image, the extra
inkrefs are ignored.
Existing images are printed in black unless inkrefs are specified in the INKS pa-
rameter.
Inkrefs may be entered as ink names or as numeric ink indices using an inklist
specified by an DJDE-ILIST command or the JSL-IDR ILIST parameter which is
referenced by an JSL-OUTPUT IDR parameter or the DJDE-IDR command.
Only references to primary colours are allowed.
This option has the following components:
channo
The number of the channel being assigned. It is an integer in the range 0 to 15.
The user may end the VFU command with a semicolon and start another VFU
command without an id field to continue specification for the same channel or a
different channel.
lineno
The number of the output print line being assigned to a particular channel. It is
an integer in the range TOF to BOF. There are no default assignments for any
channel, including channels 1, 9, and 12.
value
Specifies the number of lines from the top of the output page to the last print line
on the page (bottom of form).
Page- and Record-oriented DJDEs
185
Advertisement
Table of Contents
