Table of Contents
Advertisement
Summary of ROUTE Command Parameters
Parameter
RTEXT=
(sc,[passnum |
ALL]
,[line,[col[,fon-
tindex]]])
RTEXT=
rtext-id
RTEXT=
NONE
126
Definition(s)
This option has the following components:
sc
Specifies the message to be printed (1 to 132 char-
acters). It is printed with the first font specified in the
FONTS parameter of the PDE command (refer to
fontindex).
passnum
May be either an integer number or the keyword
ALL. An integer number specifies the pass (copy
ply) to which the text applies.
ALL
Specifies that the text applies to all copies. If there
is more than one RTEXT parameter in a DJDE
packet, passnum must be in increasing numeric or-
der.
The default is passnum = 1.
line
Specifies the line number on which the first line of a
block of RTEXT message is printed. The default is
line 1 for the first text string of the pass. Otherwise,
the default is the next line of the page. Only one
RTEXT parameter may be specified per line for a
passnum.
col
Specifies the column number at which the first char-
acter of a block of RTEXT messages is to be print-
ed.
The default is column 1.
fontindex
Identifies the index (starting with 1) of the PDE font
with which the text is printed.
rtext-id
This option is used to reference a cataloged file of
RTEXT parameters previously compiled by XDL.
NONE
Specifies that no text is to be printed on a separate
page.
The default is NONE.
Print Processing
Offline
Online
DJDE
Y
Y
A29247-X4-X-8-7672
Y
Advertisement
Table of Contents
