RAUX Command
•
Since DJDE processing occurs prior to RAUX processing, DJDE records are not
checked for satisfying the RAUX criteria (offline only).
•
If RAUX-condition is met, an (additional) form may be printed on the sheet (see "Con-
figuring LCDS-Module Parameters" and "AUX_FRONT/AUX_BACK" in Administrator's
Guide)
Example
Following is an example of using the RAUX command:
T1:
C1:
154
TABLE CONSTANT='CUSTOMER COPY';
CRITERIA CONSTANT=(20,13,EQ,T1);
RAUX TEST=C1;
Using Logical Processing
A29247-X4-X-8-7672