Oce XDL Reference Manual page 94

Summary of OUTPUT Command Parameters
Parameter
COVER=
(BOTH, SEP)
CYCLE-
FORMS=
(form-id
[, (INKS, inkref
[, inkref][, ...])]
[, form-id
[, (INKS, inkref
[, inkref][, ...])])
CYCLE-
FORMS
= NONE
DUPLEX=
YES
DUPLEX=
NO
86
Definition(s)
Specifies that both front and back cover pages are to
be printed and that no data is to be printed on the
front cover.
The system generates additional blank pages for be-
gin and end report.
form-id
Specifies a 1 to 6 character file name (may be numer-
ic, alpha, or alphanumeric) which exists on disk. This
file is created by compiling a forms description lan-
guage source file, called an FSL file with the FDL
system task.
inkref
Identifies the inks that override the corresponding
inks specified in the ink list of the form. If the form
does not contain an ink list, the form is printed in
black. If one inkref in the ink list is omitted, commas
must be used to maintain the relative positioning of
the remaining ink references. If more inkrefs are
specified than contained in the ink list of the form, the
extra inkrefs are ignored.
Inkrefs may be entered as ink names or as numeric
ink indices using an inklist specified by an IDR ILIST
parameter which is referenced by an IDR parameter
in the same OUTPUT command.
Only references to primary colours are allowed.
NONE
Means that no form is to be added to the associated
report page of variable data.
The default is NONE.,
YES
Selects duplex printing.
NO
Specifies simplex printing.
The default is NO.
Print Processing
Offline Online DJDE
Y Y
Y Y
A29247-X4-X-8-7672
Y
Y