Oce XDL Reference Manual page 170

RSTACK Command
•
The following sections describe the syntax of the command parameters and explanations
of the parameter options.
Parameter
ACCTINFO=
(offset,length)
DELIMITER=
YES
DELIMITER=
NO
HRPTNA=
(offset,length)
HRPTNA=
NONE
PRINT=
BIN
PRINT=
BOTH
PRINT=
TRAY
162
If ACCTINFO is not specified in the JDE or JDL of the START command, it can be
invoked in a selected JDE or JDL. The first record after the selected JDE takes ef-
fect is then printed as the ACCTINFO field.
Definition(s)
This parameter has the following components:
offset
Specified in bytes (relative to zero) from the start of the user's portion of the record
to the subfield within the record.
length
The number of bytes in the subfield (1 to 64).
There is no default.
YES
Specifies that all consecutive records satisfying the TEST criteria separate one re-
port from another but are not part of either report.
NO
Specifies that this single record separates one report from another and is actually
part of the subsequent report.
The default is NO.
This option has the following components:
offset
Specified in bytes (relative to zero) from the start of the user's portion of the record
to the subfield within the record.
length
The number of bytes in the subfield (1 to 16).
NONE
Specifies no report name is selected.
The default is NONE.
BIN
Specifies that report delimiters are to be printed and the output delivered to the out-
put stacker tray.
BOTH
Specifies that report delimiters are to be printed, and the output delivered to both
the sample print tray and output stacker tray. On a continuos feed printer this is pro-
cessed the same as BIN.
TRAY
Specifies that report delimiters are to be printed, and the output delivered to the
sample print tray. On a continuos feed printer this is processed the same as NONE.
Using Logical Processing
A29247-X4-X-8-7672