Oce XDL Reference Manual page 138

Summary of VFU Command Parameters
Example
Following is an example of how to use the VFU command:
In the following example, top of form is assigned to line number 5 and bottom of form is as-
signed to line number 55. Channels 1, 2, and 12 have been assigned line numbers.
V1: VFU ASSIGN=(1,5),
Assume the printing system is printing a report and the current line number is 11. If a skip-
to-channel-1-and-print parameter were issued, a page transition occurs. Printing begins on
line 5 (assigned to channel 1), which is the top of form on the new page.
If a skip-to-channel-2-and-print parameter is issued when the current line number is 11, the
next line to be printed would be line 15 of the current page. Lines 10, 15, 20, and so forth,
are also assigned to channel 2, but since the current line number is 11, the next consecutive
line number assigned to channel 2 (greater than 11) is line 15.
If a skip-to-channel-12-and-print parameter is issued, the next line to be printed is line 55
of the current page.
130
ASSIGN=(2,(10,15,20,25,30,35,40,45,50)),
ASSIGN=(12,55),TOF=5,BOF=55;
Print Processing
A29247-X4-X-8-7672