Oce XDL Reference Manual page 201

Dynamic Job Descriptor Entries (DJDEs)
DJDE
OVER-
PRINT=
PRINT |
IGNORE |
MERGE |
PRINT2
TOF=
value
A29247-X4-X-8-7672
Definition(s)
Specifies the manner in which overprint lines are handled. (Overprint lines are
print lines whose carriage control specifies printing with no line spacing since the
last printed line.).
PRINT
Specifies that all overprint lines are to be printed as they would be on an impact
printer; that is, the second line is printed over the top of the first with no regard to
the previous data, including character spacing, which may vary between the two
lines of data.
IGNORE
All overprint lines are ignored.
MERGE
MERGE is the same as PRINT except when used with FONTINDEX or CME pro-
cessing.
PRINT2
Specifies that up to two consecutive lines will be printed per line - one line and
one overprint.
Other overprints for the line will be ignored.
The default is PRINT. PRINT2 & IGNORE are treated as PRINT.
value
Specifies the number of lines from the top of the output page to the first print line
on the page (top of form). The top-of-form specification is independent of channel
assignments. It should be greater than or equal to 1 and less than or equal to the
smallest line number assigned to a channel.
The default is 1.
Page- and Record-oriented DJDEs
193