Oce XDL Reference Manual page 180

Page- and Record-oriented DJDEs
DJDE
BFORM=
NONE
COLLATE=
YES
COLLATE=
NO
COPIES=
number
DUPLEX=
YES
DUPLEX=
NO
END;
FEED=
stock-reference
FEED=
stock-name
FEED=
(MAIN, AUX, OPR)
172
Definition(s)
NONE
Specifies that no form is to be added to the associated report page of variable
data.
YES
Specifies that report copies are to be printed in collated mode.
NO
Specifies that report copies are to be printed in uncollated mode.
number
Specifies the number of copies of a report to produce at the next page bound-
ary.
YES
Selects duplex printing.
NO
Selects simplex printing.
Indicates END of a DJDE package.
stock-reference
Allows users to change stocks associated with a job without altering the stock
references in the data application itself.
stock-name
Bypasses the reference feature, but not recommended.
lt requires that the stock-name is specified as present in the current STOCK-
SET. (FEED=cluster- reference should always be used.)
(MAIN, AUX, OPR)
Provide compatibility to existing applications. FEED=OPR is equivalent to
FEED=MAIN.
Note: The terms cluster-name and stock-name are synonymous.
Continuous feed printer and cannot physically support stock selection. How-
ever, it does logically support stock selection by printing the logical page which
is to be printed on a changed stock on a new front side.
Each DJDE containing a FEED= force a new logical page.
If DJDE-FEED switches to AUX-tray, an (additional) form may be printed on
the sheet (see "Configuring LCDS-Module Parameters" and "AUX_FRONT/
AUX_BACK" in Administrator's Guide)
The default is OPR.
Dynamic Job Descriptor Entries (DJDEs)
A29247-X4-X-8-7672