Oce XDL Reference Manual page 80

Summary of LINE Command Parameters
Parameter
FCB=
PROCESS
FONTINDEX=
{offset | (offset
[,init-val][,bit-
opt]) | NONE}
FONTIN-
DEX=NONE
72
Definition(s)
PROCESS
FCB in 3211 Format processed
Allows the user to specify a certain location in the in-
put record where an index to the font to be used is
stored. It takes effect on the next logical page bound-
ary.
This option has the following components:
offset
Indicates the byte offset in the data record where the
font index number is to be found.
init-val
Can be one of the following: ONE or ZERO. ONE
specifies that an index value of 1 is associated with
the first font in the font list. When the bit-opt parame-
ter is used, the init-val ONE parameter must also be
used. ZERO specifies that an index value of 0 is as-
sociated with the first font in the font list, an index val-
ue of 1 is associated with the second font in the font
list, and so forth. The default is ONE.
bit-opt
A numeral having a value in the range of 1 through 7,
which specifies the number of low-order bits within
the font index byte, which, in turn, specifies an index
value into the font list of the current PDE. The default
value is 4.
If init-val is ONE or is not specified, the value of the
font index byte in the data record is a number in the
range 1 to n, where n is the number of fonts specified
in the PDE parameter (1 to 127). If ZERO is specified,
the font index is a number in the range 0 to n, where
n is the number of fonts specified in the PDE param-
eter minus one (0 to 127). The font index value must
be present in every record. If the FONTINDEX in the
data record is greater than the number of fonts spec-
ified, the first font in the list is used.
NONE
Specifies that there is no font index.
The default is NONE.
Print Processing
Offline Online DJDE
Y Y
A29247-X4-X-8-7672
Y