Oce XDL Reference Manual page 58

Summary of VOLUME Command Parameters
Parameter
LCODE=
keyword
LCODE=
id
LCODE=
NONE
LPACK=
NO
LPACK=
YES
MAXLAB=
value
50
Definition(s)
keyword
Specifies a specific, standard, system-defined
code translation table for label blocks. The avail-
able options are:
EBCDIC
ASCII
NONE
USER
USER refers to the single unlabeled CODE com-
mand allowed within the JDE or JDL.
You must specify the variable identifier id to cor-
respond to the identifier label assigned to the de-
fining CODE command.
The default is EBCDIC.
id
Specifies a variable identifier you use in the
CODE command to refer to a specific user-de-
fined code translation table. The identifier id is
required when multiple CODE commands are
contained within the JDL.
NONE
Specifies that data is not to be translated by in-
put processing.
NO
Indicates that no unpacking operation is to be
performed. If YES is specified, the UNPACK pa-
rameters specify the required unpacking method
for both the labels and the input data. The labels
do not have to be packed even though the data
may require unpacking.
The default is NO.
YES
Indicates that the labels are packed.
value
Specifies in bytes the maximum length of the
longest physical block which is to be considered
a label. The value can range from 2 to 4096
bytes. The specified value must be greater than
the MINLAB value and must not exceed the
BLOCK LENGTH.
The default is 81.
Input Processing
Offline Online DJDE
Y N
Y N
Y N
A29247-X4-X-8-7672
N
N
N