Table of Contents
Advertisement
Print Processing
IDFAULT
IDR
IMAGE
INVERT
IRESULT
LOGO
MODIFY
NTO1
NUMBER
OFFSET
PAPERSIZE
SHIFT
A29247-X4-X-8-7672
This parameter specifies the default ink for objects with no ink specified
by themselves.This parameter is in effect until another IDFAULT para-
meter is given.
This parameter is a reference to a previously defined IDR command. It
specifies an ink list to be used in conjunction with ink indices specified in
the actual OUTPUT command. The first ink in the ILIST parameter of the
IDR will be the default ink for the current job unless it is overridden by an
IDFAULT parameter.
This parameter specifies, for batch mode processing only, the initial
graphic imaging parameters to be used.
This parameter allows to define the rotation of a page relative to what is
called "Page origin from the users point of view". A page can effectively
be rotated 180° - head-to-head and head-to-toe.
This parameter specifies the printing result for pixel areas where two ob-
jects with different colours overlap. BLACK specifies that black is print-
ed, COLOUR specifies that highlight colour is printed.
In the LCDS-Module this parameter is ignored. Since our printers have
two distinct print systems for black and highlight colour working subse-
quently overlapping pixel areas will always be printed with both colours.
This parameter specifies logos to be associated with all pages of a re-
port. Up to 128 logos may be associated per page. This parameter only
works on a per-page base, it is not copy-sensitive.
This parameter specifies CMEs to be associated with report copies.
Specifies, on a report basis, whether all copies of a particular report are
printed last page first (n-to-1)
This parameter specifies page numbering on the output pages of a re-
port. The page number character string is placed on the page at the
specified line number based on the line spacing of the specified font. If
override line spacing is specified for the font, it does not affect where the
page number character string is to be printed.
This parameter specifies offset control on a report basis.
This parameter specifies the paper size to be used for printing the job.
Image shift is the shifting of the image data (system page) relative to the
physical page. This shifting is in the scan counting direction (vertical for
landscape and horizontal for portrait). The SHIFT parameter specifies
whether the image of the form and data on a page is to be shifted, and
if so, by what values. This parameter is used to shift the image on the
data in the y-direction for three-hole paper, binding, finishing, and edge-
marking.
Summary of OUTPUT Command Parameters
83
Advertisement
Table of Contents
