Oce XDL Reference Manual page 129

Print Processing
Example 2
OUTPUT COPIES=3, DUPLEX=YES, SHIFT=YES, NUMBER=(1,66,132),
COVER=(FRONT, SEP), FORMS=GBAR;
Pages printed with this OUTPUT command are in duplex mode with a margin shift of 75
dots. Three copies of the report are made, the first of which is offset; the second and third
copies are stacked on top of the first. Each page is numbered at the end of line 66. The form
GBAR appears on each data page of the report.
Example 3
OUTPUT CYCLEFORMS=(FORM1, NONE, FORM3);
or
OUTPUT CYCLEFORMS=(FORM1,,FORM3);
If there are ten pages in the report, either of the above commands would cause FORM1 to
be applied to pages 1, 4, 7, and 10; no forms to be applied to pages 2, 5, and 8; and FORM3
to be applied to pages 3, 6, and 9.
A29247-X4-X-8-7672
Summary of OUTPUT Command Parameters (Continuation)
121