Oce XDL Reference Manual page 108

Summary of OUTPUT Command Parameters (Continuation)
That edge, which defines the left/right edge coincides with the X-axis in the coordinate-
system. This direction is also defined as 'slow scan direction'.
Attention:
Duplex
If a paper is printed in duplex-mode (DUPLEX=YES), then one can imagine, that it is moved
twice through the printer: once for printing on the front- and once for printing on the back
side of the paper. After having printed on the front side, the paper is turned around the y-
axis and moved again through the print-station. So the following happens:
• the left/right edges remain the left/right edges.
• the leading edge from the front-side printing now becomes the trailing edge and vice
versa.
100
the X is an Y
Xerox AFP
(X is used in the PAGESIZE-option,
Xerox
Y is used in the PGD-structured field)
AFP
Print Processing
A29247-X4-X-8-7672