Oce XDL Reference Manual page 188

Page- and Record-oriented DJDEs
DJDE
NUMBER=
(pnum,lnum
,cnum [,findex
[, inkref]])
NUMBER=
NO
OTEXT=
NONE
OTEXT=
sc
OTEXT=
passnum
OTEXT=
WAIT
OTEXT=
END
180
Definition(s)
pnum
Page number: specifies the starting number (an integer) for page numbering. The
beginning page number may be non-positive. The number is incremented at
page transitions but not printed until it goes positive. The maximum page number
that will be printed is 9.999.999.
lnum
Line number: specifies an integer line number on which the page number is to be
placed.
cnum
Column number: specifies an integer ending column number for the page num-
ber sequence.
findex
Font index: A number which indicates the font to be used to print page numbers.
This number corresponds to one of the fonts in the list of fonts specified in the
FONTS parameter of the PDE command. If not specified, the first font in the list
is used.
inkref
Specifies the ink to be used for printing the page number. If not specified, the cur-
rent default ink is used.
Inkrefs may be entered as ink names or as numeric ink indices using an inklist
specified by an DJDE-ILIST command or the JSL-IDR ILIST parameter which is
referenced by an JSL-OUTPUT IDR parameter or the DJDE-IDR command.
Only a reference to a primary colour is allowed.
NO
Specifies that no page numbering is to be performed.
The default is NO.
NONE
Specifies that no text message is output to the operator during job printing.
The default is NONE.
sc
Specifies a text message of up to 80 characters (maximum of 400 characters per
report).
passnum
Specifies the pass (copy ply) to which the text applies. Multiple sc messages, one
per passnum, may be specified in a JSL. The message is output to the operator
prior to the beginning of printing the specified report ply. If no pass number is
specified, the text is output once at the beginning of printing the entire report.
WAIT
Specifies that after the text is displayed, printing is suspended until the operator
has responded with a CONTINUE parameter.
END
Specifies that the text is displayed after the last copy of the report is printed.
Dynamic Job Descriptor Entries (DJDEs)
A29247-X4-X-8-7672