Table of Contents
Advertisement
Dynamic Job Descriptor Entries (DJDEs)
DJDE
SHIFT=
YES
SHIFT=
NO
SIDE=
(side-opt, offset-
opt)
STOCKS=
stockset-name
A29247-X4-X-8-7672
Definition(s)
YES
Specifies that a shift occurs. A standard size shift occurs if YES is specified
(v1=75 and v2 =-75).
NO
Specifies that no shift occurs (v1=0 and v2=0).
The default is NO.
Specifies repositioning of the next logical page to the first logical page as defined
in the RPAGE command. The SIDE DJDE triggers repositioning only for a single
logical page and has no effect on processing which is specified via the RPAGE
command.
No Default
This command defines the STOCKSET and it's associated stock(s) to be used in
a report. If the stockset-name does not refer to a STOCKSET statement coded
earlier in the same JDL, it is assumed, that the STOCKSET exists globally in the
parameter file.
Whenever a new stockset is choosen (i.e. at start of report or via a DJDE JDE/
JDL switch), each stock is checked to determine that the stock exists and can be
made active. This provides an automatic method of changing stocks in the printer
as required by the data-stream.
Page- and Record-oriented DJDEs
183
Advertisement
Table of Contents
