Oce XDL Reference Manual page 137

Print Processing
Parameter
ASSIGN=
(channo,
lineno)
BOF=
value
TOF=
value
A29247-X4-X-8-7672
Definition(s)
This option has the following components:
channo
The number of the channel being assigned. It is an in-
teger in the range 0 to 15. The user may end the VFU
command with a semicolon and start another VFU
command without an id field to continue specification
for the same channel or a different channel.
lineno
The number of the output print line being assigned to
a particular channel. It is an integer in the range TOF
to BOF.
There are no default assignments for any channel, in-
cluding channels 1, 9, and 12.
value
Specifies the number of lines from the top of the out-
put page to the last print line on the page (bottom of
form). The bottom-of-form specification is indepen-
dent of channel assignments. Bottom of form should
be greater than or equal to the largest line number
assigned to a channel. The maximum value for BOF
is 255.
The default is 66.
value
Specifies the number of lines from the top of the out-
put page to the first print line on the page (top of
form). The top-of-form specification is independent of
channel assignments. It should be greater than or
equal to 1 and less than or equal to the smallest line
number assigned to a channel.
The default is 1.
Summary of VFU Command Parameters
Offline
Y
Y
Y
Online DJDE
Y Y
Y Y
Y Y
129