Table of Contents
Advertisement
Summary of OUTPUT Command Parameters (Continuation)
Parameter
PURGE=
YES
PURGE=
NO
SHIFT=
(v
v
)
1,
2
SHIFT=
YES
SHIFT=
NO
STAPLE=
YES | NO
118
Definition(s)
Document interleaved resources (images) or
JSLs, fonts, logos, images inserted in the report
by means of FILE-DJDE are deleted from the sys-
tem after having printed out this report.
The system resource libraries containing JSL,
fonts, logos, images and forms are updated after
having printed the report with either document in-
terleaved graphics (image) or with JSLs, fonts,
logos, images inserted in the report by means of
FILE-DJDE.
v1
An integer value in dots for the amount of shift on
the simplex page or the odd (front) side of the du-
plex page. (Each dot is 1/300 of an inch.) Range
for v1 is -75 to 75.
v2
A value in dots for the amount of shift on the even
(back) side of a duplex page. Range for v2 is -75
to 75. A standard size shift occurs if YES is spec-
ified (v1=75 and v2=-75).
YES
Specifies that a shift occurs. A standard size shift
occurs if YES is specified (v1=75 and v2 =-75).
NO
Specifies that no shift occurs (v1=0 and v2=0).
The default is NO.
This parameter specifies if a report should be
stitched or not assumed the printer is capable to
stitch.
The default is NO.
Note:
If NTO1=YES and STAPLE=YES, XDL overrides
NTO1=YES with NTO1=NO and notes this action
with a warning in the message window. When an
entire set is delivered to the stitcher compiler tray,
output issues a parameter to stitch the set.
For portrait sheets, the staple is driven into the up-
per left corner, which is normal. However, the
same corner that is the upper left for the portrait
orientation is the upper right for landscape orien-
tation. For landscape reports, the staple may ap-
pear to be in the wrong corner.
Print Processing
Offline
Online
DJDE
Y
Y
Y
Y
Y
Y
A29247-X4-X-8-7672
N
Y
N
Advertisement
Table of Contents
