Set The 'Network Speed - Oce ColorWave 600 User Manual

Set the 'Network speed'

Set the 'Network speed'
Introduction
Use the Océ Express WebTools to set 'Network speed' for your network adapter.
The list of values you can select depends on the type of network card.
Before you begin
This setting is editable for the System administrator or the Power user.
How to set the 'Network speed'
Click 'Configuration' - 'Network' - 'Adapter 1, hardware settings'.
1.
Click 'Edit' in the 'Adapter 1, hardware settings' bar or click the value of the 'Network
2.
speed' setting.
Click 'Ok' to confirm you entries or 'Cancel' to reject your entries.
3.
228 Chapter 7 Print quality and Print productivity