Saving A Dsc Position Call As A Waypoint; Navigating To A Saved Waypoint - Standard Horizon GX2150 Owner's Manual

14.5 SAVING A DSC POSITION CALL AS A WAYPOINT

When a position is received from a another DSC radio the GX2000/GX2150
allows the position to be saved as a waypoint.
1. After a position has been received, press the
soft key two times.
2. The first digit in the WPT Name will be flash-
ing, rotate the CHANNEL knob to the first let-
ter of the name you want to input.
3. Press the
NEL knob to select the second letter in the name.
4. Repeat step 3 until the name is shown.
5. Press and hold the
beeps to save the waypoint to memory.
6. Press the

14.6 NAVIGATING TO A SAVED WAYPOINT

1. Press and hold down the
"Setup Menu" appears.
2. Rotate the CHANNEL knob to select "GEN-
ERAL SETUP".
3. Press the
PLAY" with the CHANNEL knob.
4. Press the
"WAYPOINT", and press the
5. Select the waypoint name and press the
soft key to show the waypoint data
display.
6. Press the
the waypoint and show the Waypoint Nav display.
The radio must be connected to a GPS to be able to navigate to a
waypoint.
GX2000/GX2150
soft key, then rotate the CHAN-
soft key until the radio
soft key several times to return to radio operation.
soft key, then select "DIS-
soft key, and select
soft key to start navigating
NOTE
key until
soft key.
Page 105