9.11 AUTO DSC POLLING
The GX2000/GX2150 has the capability to automatically track four stations
programmed into the Indvidual directory.
The following procedure allows the time interval between position requests to
be setup.
9.11.1 Polling Time Interval Setup
1. Press and hold down the
"Setup Menu" appears.
2. Rotate the CHANNEL knob to select "DSC
SETUP" menu.
3. Press the
DSC INTERVAL" with the CHANNEL knob.
4. Rotate the CHANNEL knob to select the de-
sired interval time (1,2,3,4,5,10,30 and 40
minutes) and press the
5. Press the
the radio mode.
9.11.2 Selecting Stations to be Automatically Polled tracked
The radio uses the Individual directory to select stations. Refer to sec-
tion "9.5.1 Individual / Position Call Directory Setup" and to enter
MMSI of stations you want to poll before proceeding.
1. Press the
appear.
2. Rotate the CHANNEL knob to select "AUTO
POS POLLING", then press the
3. Rotate the CHANNEL knob to select the "SELECT
ADDRESS", then press the
4. The radio will show 4 calling stations to be
selected, select "CALL 1" and press the
soft key.
5. The radio will show the stations programmed
in the Individual directory. Rotate the CHAN-
NEL knob to select the desired station and
press the
6. Repeat steps 4 and 5 for CALL 2, CALL 3
GX2000/GX2150
soft key, then select "AUTO
soft key.
soft key numerous times to exit to
NOTE
key. The "DSC Menu" will
soft key.
key until
soft key.
soft key.
Page 73