8.9
PRESET CHANNELS 0 ~ 9 : INSTANT ACCESS
10 Preset Channels can be programmed for instant access. Press the one of
soft keys, then press the
If the
soft is pressed and no channels have been assigned, an alert
beep will be emitted from the speaker.
8.9.1 Preset Channel Programming
1. Rotate the CHANNEL knob to select the channel to
be programmed.
2. Press the one of the soft keys momentarily to indi-
cate these function on the display, then press and
hold the
blinks.
3. Rotate the CHANNEL knob to select the desired
Preset Channel Position ("SET 0" - "SET 9") you wish
to program.
4. Press the
the channel into the Preset Channel.
5. Repeat steps 1 through 4 to program the desired
channels into Preset Channels "0" ~ "9".
8.9.2 Operation
1. Press the one of soft keys, then press the
soft key to recall the Preset Channel. The "P SET"
icon will appear on the display.
2. Rotate the CHANNEL knob to select the desired
Preset Channel ("0" ~ "9"). The Preset Channel num-
ber appears ("P-SET0" - "P-SET9") while selecting the
Preset Channel.
3. Press the one of soft keys, then press the
soft key again to return to the last selected channel. The "P SET" icon will
disappear from the display.
8.9.3 Deleting a Preset Channel
1. Press the one of soft keys, then press the
soft key to recall the Preset Channel.
2. Rotate the CHANNEL knob to select the Preset
Channel to be deleted.
3. Press the one of soft keys, then press and hold the
soft key until the channel number is blinking.
4. Press the
channel from the Preset Channel.
Page 34
soft key to activate the preset channel bank.
soft key until the channel number
soft key momentarily to program
soft key momentarily to delete the
GX2000/GX2150