Changing The Time Area; Changing The Time Display - Standard Horizon GX2150 Owner's Manual

6.9

CHANGING THE TIME AREA

This menu selection allows the radio to show UTC time or your local time with
the offset which is enabled in section "6.8 CHANGING THE GPS TIME".
1. Press and hold down the
Menu" appears, then select "GENERAL SETUP" with
the CHANNEL knob.
2. Press the
NEL knob to "TIME AREA".
3. Press the
4. Rotate the CHANNEL knob to select "UTC" or "LO-
CAL".
5. Press the
ting.
6. Press the
radio operation.

6.10 CHANGING THE TIME DISPLAY

This menu selection allows the radio to setup to show time in 12-hour or 24-
hour format.
1. Press and hold down the
Menu" appears, then select "GENERAL SETUP" with
the CHANNEL knob.
2. Press the
NEL knob to select "TIME DISPLAY".
3. Press the
4. Rotate the CHANNEL knob to select "12 HOUR" or
"24 HOUR".
5. Press the
ting.
6. Press the
radio operation.
Page 20
soft key, then rotate the CHAN-
soft key.
soft key to store the selected set-
soft key several times to return to
soft key, then rotate the CHAN-
soft key.
soft key to store the selected set-
soft key several times to return to
key until "Setup
key until "Setup
GX2000/GX2150