Transmitting A Group Call; Group Call Using The Individual Directory - Standard Horizon GX2150 Owner's Manual

5. Press the
6. Rotate the CHANNEL knob to scroll through the first
letter of the name of the group you want to refer-
ence in the directory.
7. Press the
the name and step to the next letter to the right.
8. Repeat step 6 and 7 until the name is complete.
The name can consist of up to eleven characters, if
you do not use all eleven characters press the
soft key to move to the next space. This
method can also be used to enter a blank space in
the name. If a mistake was made entering in the
name repeat pressing the
wrong character is selected, then rotate the CHAN-
NEL knob to correct the entry.
9. After the eleventh letter or space has been entered, press and hold the
soft key to advance to the GROUP MMSI (Maritime Mobile Service
Identity Number) number entry.
10. Rotate the CHANNEL knob to select the second number of the MMSI
(nine digits: first digit permanently set to "0") which
you want to contact, then press the
to step to the next number. Repeat this procedure
until all eight space of the MMSI number are en-
tered.
11. If a mistake was made entering in the MMSI number repeat pressing the
soft key until the wrong number is selected, then rotate the CHAN-
NEL knob to correct the entry.
12. To store the data entered, press and hold the
13. To enter another group address, repeat steps 5 through 12.
14. Press the

9.7.2 Transmitting a Group Call

9.7.2.1 Group Call using the Individual Directory

1. Press the
2. Rotate the CHANNEL knob to select "GROUP". (To
cancel, press the
3. Press the
and the "Last Group Call" will appear.
4. Rotate the CHANNEL knob to select the "Group"
you want to contact.
5. Press the
GX2000/GX2150
soft key.
soft key to store the first letter in
soft key several times to return to radio operation.
key. The "DSC Menu" will appear.
key.)
soft key. The transceiver will beep,
soft key, then rotate the CHAN-
soft key until the
soft key
soft key.
Page 61