Receiving An All Ships Call - Standard Horizon GX2150 Owner's Manual

9.4.2 Receiving an All Ships Call

1. When an all ships call is received, an emergency
alarm will sound.
The display shows the MMSI of the vessel trans-
mitting the All Ships Call and the radio will change
to the requested channel after 10 seconds.
2. Press any key to stop the alarm.
3. Monitor the requested channel until the ALL SHIPs
voice communication is completed.
On the display you will notice 3 soft key selections.
These selections are described below:
a. : Accept to auto switching to requested
channel.
Note: If a key is not pressed for 30 seconds or longer the radio will auto-
matically change to the requested channel.
b. : Temporarily suspend switching to the requested channel.
c. : Exit to the working channel.
4. Press the
Page 50
soft key to return to the channel display.
GX2000/GX2150