Checking Gps Connections; Changing The Gps Time - Standard Horizon GX2150 Owner's Manual

6.7

CHECKING GPS CONNECTIONS

After connections have been made between the
GX2000/GX2150 and the GPS, a small satellite icon
will appear on the top right corner of the display and
your current location (Latitude/Longitude) will be shown
on the display.
If there is a problem with the NMEA connection between the radio and
the GPS, the GPS icon will blink continuously until the connection is
corrected.
6.8

CHANGING THE GPS TIME

From the Factory the GX2000/GX2150 shows GPS satellite time or UTC time
when an optional GPS is connected. A time offset is needed to show the local
time in your area. The Time Offset must be changed in order for the radio to
display the current time in your area. Please see the Offset Time Table at the
bottom of this page.
1. Press and hold down the
"Setup Menu" appears, then select "GENERAL
SETUP" with the CHANNEL knob.
2. Press the
OFFSET" with the CHANNEL knob.
3. Press the
NEL knob to select time offset of your location. See
illustration below to find your offset time. If "00:00"
is assigned, the time is the same as UTC (Universal
Time Coordinated or GPS Satellite Time).
4. Press the
5. Press the
GX2000/GX2150
NOTE
soft key, then select "TIME
soft key, then rotate the CHAN-
soft key to store the time offset.
soft key several times to return to radio operation.
O T
FFSET
key until
T
IME ABLE
Page 19