8.13 VOICE SCRAMBLER
If privacy of communications is desired, a CVS2500 4 code voice scrambler
(VS) can be installed in the transceiver. Contact your Dealer to have a CVS2500
installed. Refer to the section "11.8 SCRAMBLER SETUP" to program the
voice scrambler.
1. Select a channel that was programmed for scram-
bler mode ("Vs" and scrambler number will appear
on the display).
2. Monitor the channel before transmitting.
3. Transmit the voice message. The signal sent will be scrambled.
GX2000/GX2150
Page 41