Pa/Fog Operation; Pa Hail Operation - Standard Horizon GX2150 Owner's Manual

8.11 PA/FOG OPERATION

The GX2000/GX2150 has a 30W Hailer built-in and can be used with any 4
Ohm PA Horns. Standard Horizon offers a small and a large PA horn called the
220SW and 240SW. When in Hail mode the PA speaker Listen's Back (acts as
a microphone and sends sound to the front panel speaker and the speaker
mic: GX2150 only) through the PA horn speaker which provides two-way com-
munications through the PA horn speaker.
When in PA or FOG mode, the GX2000/GX2150 will receive:
1. Communications on the last selected VHF channel before entering
into the PA or FOG mode and receive DSC calls.
2. and output AIS signals and the AIS page can be accessed simulta-
neously.
PA HAIL mode:
PA HAIL mode allows the transceiver to be used as a power hailer when an
optional STANDARD HORIZON 220SW or 240SW HAIL/PA speaker is in-
stalled. The Hail mode has a listen-back feature (GX2150 only) which pro-
vides two way communication through the HAIL/PA speaker.
FOG HORN mode:
Automatic signaling is transmitted through the HAIL/PA speaker. When the
Fog horn, Bells or Whistle signal is not being outputted the GX2150 listens
back through the connected PA Horn speaker (GX2000 does not have
listen back).

8.11.1 PA HAIL Operation

1. Press one of the Soft keys momentarily, then press
the soft key.
Note: The
to see the
be customized.
2. Rotate the CHANNEL knob to select "PA", then press
the soft key.
3. Press the PTT switch to speak through the HAIL/PA
speaker.
Rotate the CHANNEL knob to control the AF output level. The AF output
level can be set from 0 to 30 watts.
4. To listen back (GX2150 only), rotate the PWR/VOL knob.
5. To exit the PA HAIL mode, press the
GX2000/GX2150
NOTE
soft key may have to be pressed
soft key if the soft keys have not
key.
Page 37