Saving A Dsc Position Call As A Waypoint; Navigating To A Saved Waypoint - Standard Horizon GX2000E Owner's Manual

14.5 SAVING A DSC POSITION CALL AS A WAYPOINT

When a position is received from a another DSC radio the GX2000E/GX2100E
allows the position to be saved as a waypoint.
1. After a position has been received, press the
[ SAVE ] soft key two times.
2. The first digit in the WPT Name will be flash-
ing, rotate the CHANNEL knob to the first let-
ter of the name you want to input.
3. Press the [ ENT ] soft key, then rotate the CHANNEL
knob to select the second letter in the name.
4. Repeat step 3 until the name is shown.
5. Press and hold the [ ENT ] soft key until the radio
beeps to save the waypoint to memory.
6. Press the [ QUIT ] soft key several times to return to radio operation.

14.6 NAVIGATING TO A SAVED WAYPOINT

1. Press and hold down the [ CALL ( MENU )] key
until "Setup Menu" appears.
2. Rotate the CHANNEL knob to select "GEN-
ERAL SETUP".
3. Press the [ SELECT ] soft key, then select "DIS-
PLAY" with the CHANNEL knob.
4. Press the [ ENT ] soft key, and select
"WAYPOINT", and press the [ SELECT ] soft
key.
5. Select the waypoint name and press the [ ENT ]
soft key to show the waypoint data display.
6. Press the [ ENT ] soft key to start navigating
the waypoint and show the Waypoint Nav display.
Page 110 GX2000E/GX2100E