1014.3 Selecting How Long The Soft Keys Are Shown - Standard Horizon GX2150 Owner's Manual

10.14.3 Selectiong How Long the Soft Keys are Shown
1. Press and hold down the
"Setup Menu" appears, then select "GENERAL
SETUP" with the CHANNEL knob.
2. Press the
CHANNEL knob to "SOFT KEY".
3. Press the
NEL knob to select "KEY TIMER" (selects how
long the soft key icon will be shown on the
display after a soft key is pressed, default is
5 seconds).
4. Press the
NEL knob to select the time.
9. Press the
10. Press the
DISPLAY
DIMMER
SCAN
DW
IC
PA/FOG
CMP: COMPASS
WPT
AIS
AIS AL
PRESET
MARK
PSET 0 - PSET 9
GX2000/GX2150
soft key, then rotate the
key, then rotate the CHAN-
soft key, then rotate the CHAN-
soft key to store the selected setting.
soft key several times to return to radio operation.
Select the menu for the display and key back light intensity
Starts and stops Scanning.
Starts and stops Dual Watch Scan.
Activates Intercom between radio and RAM3 mic (optional RAM3 required).
Activates the PA / Fog Horn function.
Shows to the "Compass" display.
Shows to the "Waypoint" Navigation display.
Shows to the "AIS" display.
Toggles the AIS alarm "on" and "off".
Porgrams or deletes the preset memory channel.
Mark the current position for a "Waypoint".
Immediately recalls the preset memory channel.
key until
FUNCTION
Page 87