Saving A Dsc Position Call As A Waypoint; Navigating To A Saved Waypoint - Standard Horizon HX851 Owner's Manual

12.5 SAVING A DSC POSITION CALL AS A WAYPOINT

When a position is received from another DSC radio the HX851 allows the
position to be saved as a waypoint.
1. After a position has been received, press the
2. The first digit in the WPT Name will be flashing, Press
the /
want to input.
3. Press the
select the second letter in the name.
4. Repeat step 3 until the name is shown.
5. Press and hold the
6. To stop navigating to waypoint:
1) Press and hold down the
appears.
2) Press the
3) Press the
4) Press the
pass" other than "Waypoint
pass pass
pass pass

12.6 NAVIGATING TO A SAVED WAYPOINT

1. Press and hold down the
Menu" appears.
Menu Menu Menu Menu
2. Press the
3. Press the
/ key.
4. Press the
the /
5. Press the
6. Select the waypoint name and press the
to show the waypoint data display.
7. Press the
waypoint and show the Waypoint Nav display.
Page 84
key to the first letter of the name you
key, then press the
key until the radio beeps.
/ key to select "Radio Setup"
key, then select "Display
key, and select "Radio
Waypoint", and press the
Waypoint Waypoint
Waypoint
/ key to select "Radio Setup
key, then select "Display
key, and select "Waypoint
key.
key.
key to start navigating the
/ key to
key until "Setup Menu
Setup Menu Setup Menu Setup Menu"
Setup Menu
Radio Setup" Radio Setup"
Radio Setup" Radio Setup".
Display" with the
Display Display
Display
Radio", "Position Position", "Navigation
Radio Radio Radio Position Position Position
key until "Setup
Setup Setup Setup
Setup
Radio Setup Radio Setup
Radio Setup Radio Setup".
Display" with the
Display Display
Display
Waypoint" with
Waypoint Waypoint
Waypoint
key
key.
/ key.
Navigation" or "Com-
Navigation Navigation Navigation
key.
Com- Com- Com- Com-
HX851