Scan Memory Programming; Memory Scanning M-Scan; Priority Scanning P-Scan - Standard Horizon GX2150 Owner's Manual

8.10.2 Scan Memory Programming

1. Press and hold down the
Menu" appears.
2. Rotate the CHANNEL knob to select "CH FUNCTION
SETUP".
3. Press the
NEL knob to select "SCAN MEMORY".
4. Press the
5. Rotate the CHANNEL knob to select a desired chan-
nel to be scanned, the press the
"MEM" icon appears on the display, which indicates
the channel has been selected to the scan channel.
6. Repeat step 5 for all the desired channels to be
scanned.
7. To DELETE a channel from the list, select the chan-
nel then press the
appears from the display.
8. When you have completed your selection, press the
eral times to return to radio operation.

8.10.3 Memory Scanning M-SCAN

1. Adjust the SQL knob until background noise disappears.
2. Press the one of the soft key momentarily, then press the
"M-SCAN" appears on the display. Scanning will pro-
ceed from the lowest to the highest programmed
channel number and Preset channel and will stop
on a channel when a transmission is received. The
channel number will blink during reception.
3. To stop scanning, press the

8.10.4 Priority Scanning P-SCAN

In the default setting, Channel 16 is set as the priority channel. You may change
the priority channel to the desired channel from Channel 16 by the Radio Setup
Mode, refer to section "11.5 PRIORITY CHANNEL".
1. Adjust the SQL knob until background noise disappears.
2. Press the one of the soft key momentarily, then press the
"P-SCAN" appears on the display. Scanning will pro-
ceed between the memorized channels, Preset chan-
nel and the Priority channel. The priority channel will
be scanned after each programmed channel.
3. To stop scanning, press the
Page 36
soft key, then rotate the CHAN-
soft key.
soft key. "MEM" icon dis-
or
or
key until "Setup
soft key.
key.
key.
soft key sev-
soft key.
soft key.
GX2000/GX2150