Receiving A Group Call - Standard Horizon GX2150 Owner's Manual

number, repeat pressing the
the wrong number is selected, then rotate the CHAN-
NEL knob to correct the entry.
9. When finished entering the MMSI number, press and
hold the
10. Rotate the CHANNEL knob to select the operating channel you want to
communicate on, then press the
is not shown, press the
select the operating channel you want to communicate on, then press the
soft key.
11. Press the
Group Call signal.
12. After the Group Call is transmitted, all the ra-
dios in the group will switch to the designated
channel.
13. Listen to the channel to make sure it is not
busy, then press the PTT button and talk into
the microphone to the group of vessels.

9.7.3 Receiving a Group Call

1. When a group call is received, the GX2000/GX2150 will produce a ringing
alarm sound.
2. The radio will automatically switch to the requested
channel.
3. Press the
4. Monitor the channel for the person calling the Group for a message.
5. If you want to respond, monitor the channel to make sure it is clear, then
press the microphone's PTT switch and talk into the microphone to the
group of vessels.
6. Press the
After a Group call is received, the time the call was made and the ships
MMSI or vessels name will appear on the display.
GX2000/GX2150
soft key.
soft key, then rotate the CHANNEL knob to
soft key to transmit the
soft key to stop the alarm.
soft key to return to radio operation.
NOTE
soft key until
soft key. If the channel you want
Page 63