Saving A Position Report Call As A Waypoint; Navigating To A Saved Waypoint - Standard Horizon GX2150 Owner's Manual

9.9.6 Saving a Position Report as a Waypoint
The GX2000/GX2150 can save a Position Report call in the radios memory as
a waypoint.
1. After the Position Report call has been re-
ceived: Press the
2. Rotate the CHANNEL knob to change the first
letter in the name of the waypoint and press
the soft key.
3. Repeat step 2 until the WPT Name is entered.
4. Press and hold the

9.9.7 Navigating to a saved waypoint

1. Press and hold down the
"Setup Menu" appears.
2. Select "GENERAL SETUP" with the CHANNEL
knob.
3. Press the
PLAY" with the CHANNEL knob.
4. Rotate the CHANNEL knob to select
"WAYPOINT" and press the
5. Rotate the CHANNEL knob to select the
waypoint name and press the
6. Press the
pass display and to navigate to the waypoint.
The display indicates the distance and direction of
the saved waypoint, and also the compass indicates
the saved waypoint by dot ( ) .
GX2000/GX2150
soft key.
soft key to save the waypoint into memory.
soft key, then select "DIS-
soft key so show the com-
key until
soft key.
soft key.
Page 71