11.9 DEMO MODE
This mode is used by Standard Horizon sales persons and dealers to demon-
strate radio, DSC and AIS functions in show rooms or at boat shows. Demo
mode allows Latitude, longitude and time to be entered to simulate radio dis-
plays. When DEMO mode is enabled, the radio display will automatically switch
from NORMAL, COMPASS, AIS and WAYPOINT displays.
When demo mode is enabled and the radio is turned off and back on the
radio will still be in DEMO mode.
1. Press and hold down the
"Setup Menu" appears.
2. Rotate the CHANNEL knob to select "DEMO
MODE".
3. Press the
with the CHANNEL knob.
4. Press the
5. Enter the latitude/longitude of your vessel and
your local UTC time in the 24-hour notation
by the CHANNEL knob. Rotate the CHAN-
NEL knob to select the number and press the
soft key to move the cursor to the next
character. You may backspace the cursor by
pressing the
mistake.
6. To store the data entered, press and hold the
soft key.
7. Rotate the CHANNEL selector knob to "DEMO
START" and press the
8. Select "START" using the CHANNEL selector knob and press the
soft key.
To stop DEMO mode, perform steps above, in step 8 select "STOP".
GX2000/GX2150
NOTE
soft key, then select "POS INPUT"
soft key.
soft key, if you make a
soft key.
NOTE
key until
Page 93