Channel Name - Standard Horizon GX2150 Owner's Manual

11.7 CHANNEL NAME

When radio mode (NORMAL) is selected, the display will show a name under
the channel number. This name describes the use of the channel. The radio
has the capability to customize the name by the procedure below.
Example: CH69 PLEASURE to HOOKUP
1. Press and hold down the
Menu" appears.
2. Rotate the CHANNEL knob to select "CH FUNCTION
SETUP".
3. Press the
with the CHANNEL knob.
4. Press the
5. Rotate the CHANNEL knob to select the channel to
be named, then press the
6. Rotate the CHANNEL knob to scroll through the first
letter of the new channel name.
7. Press the
the name and step to the next letter to the right.
8. Repeat step 6 and 7 until the name is complete.
The name can consist of up to 16 characters, if you
do not use all 16 characters press the
key to move to the next space. This method can
also be used to enter a blank space in the name. If
a mistake was made entering in the name repeat
pressing the
is selected, then rotate the CHANNEL knob to cor-
rect the entry.
9. Press and hold the
name.
10. If you want to enter the name of another channel, repeat steps 5 through 9.
11. Press the
GX2000/GX2150
soft key, then select "CH NAME"
soft key.
soft key to store the first letter in
key until the wrong character
soft key to save the
soft key several times to return to radio operation.
key until "Setup
soft key.
soft
Page 91