Saving A Dsc Position Call As A Waypoint - Standard Horizon HX851E Owner's Manual

12.5 SAVING A DSC POSITION CALL AS A WAYPOINT

When a position is received from another DSC radio the HX851E allows the
position to be saved as a waypoint.
1. After a position has been received, press the
[ CALL ( ENT ) MENU ] key.
2. The first digit in the WPT Name will be flashing, Press
the [ ] / [ ] key to the first letter of the name you want
to input.
3. Press the [ CALL ( ENT ) MENU ] key, then press the [ ]
/ [ ] key to select the second letter in the name.
4. Repeat step 3 until the name is shown.
5. Press and hold the [ CALL ( ENT ) MENU ] key until the
radio beeps.
6. To stop navigating to waypoint:
1) Press and hold down the [ CALL ( ENT ) MENU ] key
until "Setup Menu" appears.
2) Press the [ ] / [ ] key to select "Radio Setup".
3) Press the [ CALL ( ENT ) MENU ] key, then select "Display" with the [ ] /
[ ] key.
4) Press the [ CALL ( ENT ) MENU ] key, and select "Radio", "Position", "Navi-
gation" or "Compass" other than "Waypoint", and press the
[ CALL ( ENT ) MENU ] key.
HX851E Page 79