Saving A Dsc Position Call As A Waypoint; Navigating To A Saved Waypoint - Standard Horizon Matrix GX2000 Owner's Manual

14.4 SAVING A DSC POSITION CALL AS A WAYPOINT

When a position is received from a another DSC radio the GX2000/GX2100
allows the position to be saved as a waypoint.
1. After a position has been received, press the
[ SAVE ] soft key.
2. The first digit in the WPT Name will be flash-
ing, rotate the CHANNEL knob to the first let-
ter of the name you want to input.
3. Press the [ ENT ] soft key, then rotate the CHANNEL
knob to select the second letter in the name.
4. Repeat step 3 until the name is shown.
5. Press and hold the [ ENT ] soft key until the radio
beeps.

14.5 NAVIGATING TO A SAVED WAYPOINT

1. Press and hold down the [ CALL ( MENU )] key
until "Setup Menu Setup Menu" appears.
Setup Menu Setup Menu
Setup Menu
2. Rotate the CHANNEL knob to select "GEN-
ERAL SETUP ERAL SETUP
ERAL SETUP ERAL SETUP". ERAL SETUP
3. Press the [ SELECT ] soft key, then select "DIS-
PLAY" with the CHANNEL knob.
PLAY PLAY
PLAY PLAY
4. Press the [ ENT ] soft key, and select
WAYPOINT", and press the [ SELECT ] soft
"WAYPOINT
WAYPOINT WAYPOINT WAYPOINT
key.
5. Select the waypoint name and press the [ ENT ]
soft key to show the waypoint data display.
6. Press the [ ENT ] soft key to start navigating
the the waypoint and show the Waypoint Nav dis-
play.
GX2000/GX2100
GEN- GEN- GEN- GEN-
DIS- DIS- DIS-
DIS-
Page 95