Individual Reply Setup; Individual Acknowledgment Setup - Standard Horizon GX2150 Owner's Manual

desired number and move one space to the right by
pressing the
until all nine space of the MMSI number are entered.
11. If a mistake was made entering in the MMSI number
repeat pressing the
then rotate the CHANNEL knob to correct the entry.
12. To store the data entered, press and hold the
13. To enter another individual address, repeat steps 5 through 12.
14. Press the

9.5.2 Individual Reply Setup

This menu item sets up the radio to automatically (default setting) or manually
respond to a DSC Individual call requesting you to switch to a working channel
for voice communications. When Manual is selected the MMSI of the calling
vessel is shown allowing you to see who is calling. This function is similar to
caller id on a cellular phone.
1. Press and hold down the
"Setup Menu" appears.
2. Rotate the CHANNEL knob to select "DSC
SETUP" menu.
3. Press the
VIDUAL REPLY" with the CHANNEL knob.
4. Press the
5. Rotate the CHANNEL knob to select "AUTO-
MATIC" or "MANUAL".
6. Press the
ting.
7. Press the

9.5.3 Individual Acknowledgment Setup

The radio can be setup to transmit a reply automatically (default) or set so the
radio will not reply to an individual call.
1. Press and hold down the
"Setup Menu" appears.
2. Rotate the CHANNEL knob to select "DSC
SETUP" menu.
3. Press the
VIDUAL ACK" with the CHANNEL knob.
4. Press the
5. Rotate the CHANNEL knob to select "ABLE
Page 52
soft key. Repeat this procedure
soft key until the wrong number is selected,
soft key several times to return to radio operation.
soft key, then select "INDI-
soft key.
soft key to store the selected set-
soft key several times to return to radio operation.
soft key, then select "INDI-
soft key.
key until
key until
soft key.
GX2000/GX2150