Station Name - Standard Horizon GX2150 Owner's Manual

10.13 STATION NAME

This function allows you to change the name of the radio or second station
microphone. Example: "Radio - Cabin", "RAM1 - Flybridge".
1. Press and hold down the
Menu" appears, then select "GENERAL SETUP" with
the CHANNEL knob.
2. Press the
NEL knob to select "STATION NAME".
3. Press the
4. With the second station microphone connected, ro-
tate the CHANNEL knob to select the Unit ("Radio"
or "RAM1") to be named, then press the
key.
5. Rotate the CHANNEL knob to scroll through the first
letter of the new channel name.
6. Press the
the name and step to the next letter to the right.
7. Repeat step 5 and 6 until the name is complete.
The name can consist of up to 8 characters, if you
do not use all 8 characters press the
space. This method can also be used to enter a blank space in the name.
If a mistake was made entering in the name repeat pressing the
soft key until the wrong character is selected, then rotate the CHANNEL
knob to correct the entry.
8. Press and hold the
9. If you want to enter the name of the connected RAM3 or Radio, repeat
steps 4 through 8.
10. Press the
GX2000/GX2150
soft key, then rotate the CHAN-
soft key.
soft key to store the first letter in
soft key to enter the name.
soft key several times to return to radio operation.
key until "Setup
soft
soft key to move to the next
Page 85