Connecting Cables To The Rmx 1500 - Polycom 1500 Deployment Manual

Polycom RealPresence Collaboration Server (RMX)1500/2000/4000 Deployment Guide for Maximum Security Environments

Connecting Cables to the RMX 1500

To connect the cables:
•
•
•
•
The LAN 1*, LAN3, LAN4 and Modem ports are not be used and the plastic caps covering those
ports should not be removed.
* With Multiple network and LAN redundancy configurations, LAN 1 port is used. For more
information, see the RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator's
Guide, Multiple Services and LAN Redundancy.
1-12
Connect the Media cable to LAN 2 port.
— Optional. If LAN Redundancy or Multiple Networks options are used, connect the
LAN cable to LAN 1. For more information, see the RealPresence® Collaboration
Server Administrator's Guide, "LAN Redundancy" on page
Connect the Network cables to:
— the MNG (Signaling) port
— the MNGB (Management Network) port.
Optional. Connect the Shelf Management cable to the Shelf port.
Optional. For ISDN/PSTN connections, connect the E1/T1 cables to their PRI (1-4)
ports.
E1/T1 PRI
Power Cable
Connection(s)
LAN 2 - media;
MNG - signaling;
MNG B - management & Shelf
16-32
Polycom, Inc.