Telescopic Rail Runner Assembly - Polycom 1500 Deployment Manual

Polycom RealPresence Collaboration Server (RMX)1500/2000/4000 Deployment Guide for Maximum Security Environments
Table 1-1
Part/Kit no.
RMX chassis
assembly kit

Telescopic Rail Runner Assembly

Rack Rail Runners require a minimum of 48cm and a maximum of 80cm within the rack for
installation
1
1-6
Rail Runners Kit Contents
Item
Pan head screw -
M5*12mm
Flat washer M5
Determine the location of the RMX on the rack:
— Allow for a 1U gap above and below the system for ventilation.
— Use the Rack Spacer (item no. 3) to predetermine its position on the rack post,
making sure that square studs of the spacer fit into the rack post's square/rounded
mounting holes. Mark the spacer's location on the rack post. Repeat this process for
the 3 remaining vertical posts ensuring that the system can be horizontally seated.
Figure 1-1 Front view of RMX Rail Runner Assembly
Item
no. Item Sample
8
9
LEFT RAIL
Item
Quantity
2
2
RIGHT RAIL
Polycom, Inc.