Polycom 1500 Deployment Manual page 155

Table 5-3
Command
NumberOf
Repeat
Chars
Allowed
Min
NumberOf
Changed
Chars
daysFor
Password
Expire
Notification
password
ReuseBuff
Size
user
LockedOut
Duration
user
Session
Limit
auditLog
Threshold
Password
Expiration
Timeout
User
Lockout
Failures
Interval
Polycom, Inc.
Advanced Commands (Continued)
Parameters Description
1-4 Sets the number of repeated characters
allowed in valid password.
Available Since V5.7.2
1-4 Sets the minimum number of characters
needed to change when setting new
password.
Available Since V5.7.2
1-7 Sets the number of days before password
expires that a 'password expiration notice' will
be shown to user.
Available Since V5.7.2
8-16 Sets the number of passwords saved to check
for reuse. i.e. if the buffer is set to 10, then the
user cannot re-useany of the last 10
passwords.
Available Since V5.7.2
0-480 Sets the number of minutes before user that
minutes was locked out will be automatically released.
Value of 0 – means indefinite.
Available Since V5.7.2
1-10 Sets the number of simultaneous sessions per
sessions user allowed.
Available Since V5.7.2
10 -100 Sets the audit log threshold, so that when this
percent of value is reached an audit log overflow trap is
log capacity sent.
Available Since V5.7.2
30-180 days Sets the number of days till password will
expire.
Available Since V5.7.2
60-1440 Period of time in which the failed login
minutes. threshold must be exceeded the lock the
(1440 = 24 users account.
hours)
Available Since V5.7.2
Chapter 5-Deploying a Polycom RMX™ Serial Gateway S4GW
Default
2
4
7
10
0
5
70
60
60
5-17