Polycom 1500 Deployment Manual page 43

16 Define the following parameters:
17 Click Next.
18 Click Add to define dial-in number ranges.
Polycom, Inc.
Table 1-11 Fast Configuration Wizard – Spans Definition
Field Description
Framing Select the Framing format used by the carrier for the network interface
from the list.
•
•
Side Select one of the following options:
•
•
•
Note: If the PBX is configured on the network side, then the RMX unit
must be configured as the user side, and vice versa, or both must be
configured symmetrically.
Line Coding Select the PRI line coding method from the list.
•
•
Switch Type Select the brand and revision level of switch equipment installed in the
service provider's central office.
•
•
Note: For T1 configurations in Taiwan, Framing must be set to ESF and
Line Coding to B8ZS.
The Phones dialog box opens.
For T1 spans, default is SFSF.
For E1 spans, default is FEBE.
User side (default)
Network side
Symmetric side
For T1 spans, default is B8ZS.
For E1 spans, default is HDB3.
For T1 spans, default is AT&T 4ESS.
For E1 spans, default is EURO ISDN.
Chapter 1-First Time Installation and Configuration
1-37