Polycom 1500 Deployment Manual page 137

Step 7: Re-enable Secured Communications Mode.
Polycom, Inc.
Chapter 4-Restoring the RealPresence® Collaboration Server (RMX®) 1500/2000/4000 Using the USB Port
The Hardware Monitor pane is displayed.
Click the Reset button.
d
The RMX restarts. System restart can take 5 - 10 minutes, depending on the RMX's
configuration.
Using the RMX Manager:
In the MCUs list, select the RMX to be updated.
e
Right-click in the MCUs list entry and select Connect.
f
Click Accept to accept the warning banner.
g
Enter an administrator Username and Password.
h
Click OK.
i
Using the RMX Manager:
In the RMX Management pane, click the IP Network Services button. (Depending
a
on the RMX Manager configuration, you may have to click Rarely Used first.)
In the IP Network Services list pane, double-click Management Network.
b
The Management Network Properties dialog box is displayed.
Select the Secured Communication check box.
c
Click OK.
d
A message informs you that your session will be disconnected and that you must
re-connect the RMX using https in the browser URL.
Click OK.
e
4-13