Polycom 1500 Deployment Manual page 47

28 Click Save & Close.
29 In the Success Message box, click OK.
30 In the Reset Confirmation dialog box, click Yes.
31 In the Please wait for system reset message box, click OK.
System restart may take up to five minutes.
32 Refresh the browser periodically until the Login screen is displayed.
33 When the Login screen is displayed, enter your Username and Password and click Login.
Polycom, Inc.
The RMX confirms successful configuration.
On first entry, the default Username and Password are both POLYCOM.
The system is now fully configured and if there are no System Errors, the green RDY
LED on the CNTL module on the RMX's front panel turns ON.
Chapter 1-First Time Installation and Configuration
1-41