Advanced Commands - Polycom 1500 Deployment Manual

Polycom RealPresence Collaboration Server (RMX)1500/2000/4000 Deployment Guide for Maximum Security Environments

Advanced Commands

Table 5-3
Command
Advanced
Security
Mode
Session
Inactivity
Enabled
Timeout
password
Change
Minimum
Time
minimum
Password
Length
upperCase
Minimum
lowerCase
Minimum
Numerical
Chars
Minimum
Special
Chars
Minimum
5-16
Advanced Commands
Parameters Description
ENABLE This command puts the Gateway in
MAXIMUM security mode. Used by: CS
Available Since V5.7.2.0.7
5-60 Sets the Inactivity timeout value. Web will
minutes disconnect from GW if user is inactive for this
period of time.
Available Since V5.7.2
1-30 days Sets the minimum number of days needed to
pass before User can change his/her own
password. This value is not valid for
administra-tors
Available Since V5.7.2
8-15 Sets the minimum length of a valid password
Available Since V5.7.2
1-2 Sets the minimum number of upper case
characters needed for a valid password.
Available Since V5.7.2
1-2 Sets the minimum number of lower case
characters needed for a valid password.
Available Since V5.7.2
1-2 Sets the minimum number of numerical
characters needed for a valid password.
Available Since V5.7.2
1-2 Sets the minimum number of special
characters needed for a valid password.
Available Since V5.7.2
Default
The default of the
Gateway will be in
MINIMUM security
mode , but once the
user sets the
Gateway to
Maximum security
the only way to go
back to Standard
security is by the
'Setting Factory
Defaults'
procedure.
10 minutes
1 day
15
2
2
2
2
Polycom, Inc.