Polycom 1500 Deployment Manual page 152

Polycom RealPresence Collaboration Server (RMX)1500/2000/4000 Deployment Guide for Maximum Security Environments
2
3
Table 5-2
Advanced Command
advancedsecuritymode
embeddedMode
daysForPassword
ExpireNotification
h239OlcPatch
IsdnCapsTimeout
lowerCaseMinimum
MinNumberOfChangedChars
5-14
If HTTPS is enabled, a Security Alert screen is displays.
Click Yes to proceed and display the Administrator login screen. Click No to cancel
b
the current operation.
Type a user name and password.
c
Click Login.
d
Enable Maximum Security Mode:
In the Gateway interface, on the sidebar, click Device.
a
Click the Security tab.
b
In the Security mode field, select Maximum (no Telnet, ftp, SNMP and ICMP)
c
Verify the Advanced Settings for Maximum Security Mode:
In the Gateway interface, on the sidebar, click Gateway.
a
Click the Settings tab.
a
Click Advanced >> Commands.
a
The Advanced Settings dialog box is displayed.
Enter the Advanced Commands in Table 5-2 and observe the returned Status Messages.
b
If necessary, modify the settings to match those listed in the table.
For more information see "Advanced Commands" on page 5-16.
Maximum Security - Advanced Command Settings
Status message
Advanced Security Mode is currently DISABLED
ENABLED
Number of days till password expiration is set to 7
ENABLED
15
Minimum lower case chars in password is set to 2
Minimum number of changed chars in password
is set to 4
Status
After
Setting/
Enable
Advanced
Security
mode -
ENABLED
NO
CHANGE
NEEDED
NO
CHANGE
NEEDED
NO
CHANGE
NEEDED
Polycom, Inc.