Polycom 1500 Deployment Manual page 31

4
5
6
None of the reserved IP addresses listed in Table 1-3 should be used for the IP Address.
Polycom, Inc.
In the Local Area Connection Properties dialog box, select Internet Protocol [TCP/IP] >
Properties.
In the Internet Protocol (TCP/IP) Properties dialog box, select Use the following IP
address.
Enter the IP address, Subnet mask and Default gateway for the workstation.
The workstation's IP address should be in the same network neighborhood as the
RMX's Control Unit IP address.
Example: IP address – near
The Subnet mask and Default gateway addresses should be the same as those for the
RMX's Default Management Network.
The addresses needed for connection to the RMX's Default Management Network are
listed in Table 1-3.
192.168.1.nn
Chapter 1-First Time Installation and Configuration
1-25